If you have a lifted Jeep and didn’t address your panhard bar when you installed that lift, you;re probably regretting it. Likewise, if you put […]
Tag: jeep
Unbox and setup of a Harbor Freight 20 Ton Shop Press
I’m getting my new harbor freight 20 ton shop press out of the box and setting it up in my shop. This seems like a […]
Make your shop-floor Super Clean – Super Clean Floor Absorbent demo and review
Today I’m trying out the Super Clean Floor Absorbent on some spilled oil in my shop! The folks at Super Clean reached out to me, […]
Get Cleaner FCAW welds without switching to gas!
Everybody knows that Flux-core (gasless) MIG welding will generally give you more spatter on your work piece than gas mig welding will. The problem is, […]
A close up look at the Affordable Bender’s Build Quality
My Affordable Bender video has had a TON of views! Thank you all! However, some of you have asked about the build quality, or flat […]
I’m installing the Midland MXT275 in my 2005 Jeep Wrangler Unlimited
Maybe you’ve heard, but the off-road industry is quickly moving away from CB radios and into GMRS. So I decided to take advantage of Midland […]
How well does the Yeswelder Cut-55DS cut when it’s got a proper 220 line? Let’s find out!
So, I’ve had this Yeswelder Cut-55DS for about 6 months, give or take. I did not have a proper 220 line in the shop to […]
December 2020 Channel Update
Hey, You guys are awesome. Seriously. I havent puyt out a substantial video in a month and you all stick with me. Not only that, […]
It’s #ThowbackThursday! This time we’re a little more recent, and at AOAA with my 2013 JK. #shorts
This picture is from the summer of 2014. I had a 2013 JK Sport, and took it to AOAA almost ocmpletely stock. A buddy of […]
#ThrowbackThursday with SWBCrawler – 2 – Remembering a good day with an old fiend
Here’s another installment of #ThrowbackThursday! Today I’ve got a few pictures from a day of wheeling from early on in my Jeep life. An old […]